edit this page - page history - about editing


  1. Essential Software for Windows

Failed to format the selected partition 0x8004242d

I came across this error while trying to install Windows 7. It wouldn't let me install over my previous install on a SSD disk, I think because it was BIOS formatted and I now had to install Windows 7 using UEFI. I also could not create a USB bootable disk that would allow BIOS startup (it would report just "Disk error"). How annoying!!

To fix this error, instead of trying to "format" the partition, I just deleted it and then created it new. Now I have three partitions: one System, one MSR (Reserved) and one Primary.

Windows could not complete the installation. To install Windows on this computer, restart the installation.

This took me two hours to debug and finally resolve. This error can mean almost anything. There are some important tools that will help you solve this error: If you are installing Windows pre-SP1, the most common answer on the Internet is that a registry entry over 8KB is trying to be installed. There is a hotfix available, which you can install by copying onto a USB stick and accessing it via command line. Make sure you get the correct (x86 or x64) fix, x64 is hidden away on the captcha'd page. If you try to install over SP1 you will get "This update is not applicable for your computer."

You can also use tracerpt to translate the setup log (binary) into a human-readable format, you can do this all within the command prompt. This can help you find invalid/bad registry keys that you can delete with REG DELETE :

cd /windows/panther
tracerpt setup.etl -o logfile.csv -of CSV

Another option is to install Windows 7 in legacy mode instead of UEFI mode. I've never had a single problem installing Windows in legacy/BIOS mode. There are some other steps that didn't help me.

But if you are post-SP1, there are significantly fewer options. The answer that worked for me was posted by MarkBeacom:

Hit SHIFT-F10 to bring up command prompt.

type MMC
Click File -> Add/Remove Snap-in... (Or CTRL+M)
Select Computer Management (Double click and Finish on Local Computer)
Click OK
Double click Computer Management (Local) -> System Tools -> Local Users and Groups -> Users -> Double Click Administrator -> Uncheck Account is disabled -> OK
Now right click Administrator -> Set Password... -> Set a decent password to get started.

Now, restart. Should be good to go.

If this doesn't work try next step:
SHIFT-F10 to bring up command prompt.
type: CD C:/windows/system32/oobe
type msoobe
Make a generic account and password. hit finish (if it requests a product key and you have one, enter it now. if OEM/No key required, just finish). Set time/date. Finish.
Should be good to go.

My next idea after this was to check my BIOS settings and turn off any SSD performance options - my setuperr.log file was reporting only the following line (which I don't actually think was fatal):

2012-07-29 15:49:51, Error      [0x0606cc] IBS    ApplyDiskOperationUsingService: Failed to correctly apply disk operation of type [0xe]; hr = 0x8007009a[gle=0x0000009a]
2012-07-29 15:49:51, Error      [0x060492] IBS    PerformDiskOperation:Disk operation of type [14] failed; hr = 0x8007009a

My next three options after this were to: A lot of the other solutions required access to another existing Windows 7 machine, which I did not have.

Creating a symbolic directory link

Within a command prompt as administrator:

mklink /j "c:/virtual directory" "c:/actual source directory"

Categories: Windows | Troubleshooting
edit this page - what links to here? - page history - top
Last edited by jevon jevon 16 months ago